If you look at the market, you may be discouraged from buying a new stable because of the sky-high prices. The most accessible are not as durable and can collapse within a few months. So why buy expensive and cheap chicken coops when you can build your own chicken coop practically without money, when you can build a pallet chicken coop?
In any case, you can build your own chicken coop from the scrap that lies around the workshop and on the pallets. Because you have the solution for the choice of material, you can choose durable materials to make the chicken coop last longer. Are you ready for a little chicken coop?
Materials for the construction of poultry houses from pallets
Here is a list of all the materials you need for a fully functional chicken farm:
- Wood waste
- Sheet metal for the roof
- Door lock
- Gauze wire
- Shield wire
- Hand saw
Construction of a cooperative
Here you will find step-by-step instructions for building a pallet house.
Step 1: Material hunt
The first and most important material you need are the pallets. They can be dismantled and used for tons of creative and constructive work. In fact, you can find them all over town at local shops such as fruit and vegetable sellers.
Determine the size of the pallets you need. Among other things, this will help you calculate the exact number of pallets required. It is strongly recommended to receive more pallets than necessary in case of calculation errors.
In general, a 2×4 palette is sufficient. You may have to fold them if you want to walk around the chicken coop or build a solid pallet wall.
It is almost always possible to remove wood waste from workshops and landfills. Finally, make sure that the wood is dry and not too sensitive.
Step 2: Financing Programming
Plan a precise radius in which the poultry house must be located. This allows you to decide for yourself how many pallets you need. Most owners of chicken houses choose a rectangular area. Go to a larger area than you think you need in case you want to add more chickens later on.
Secure the pallets with a drill and create a solid base for the pallets. If the grinding is not regular, place the grinding blocks underneath. Finally, check the filling level to make sure that all pallets are suitable for your chickens.
Step 3: Construction of a wall
After you have made the solid floor, start by screwing the pallets vertically onto the wooden floor. For best results, try to use palettes of the same size. This will help you to achieve uniformity throughout the poultry house. If you don’t, don’t worry. Just screw it to an old thing with holes in it.
As soon as the first row is strong and powerful, you go to the second level. Add extra wooden pallets to the first layer and screw them down. However, you can skip this step if you don’t want to do it from the pallet walls in the henhouse.
Make sure it’s high enough so you can get up easily, even if it’s a small clean room.
Step 4: Adding a roof
The next step is of course a roof that keeps the chickens warm and dry. With this step you can express your art. An old sheet metal can simply be used as a roof. Put it on your chicken coop.
Another good idea is to unscrew the floor pallets and screw them on top. You can then put straw, hay or plastic bags on it for full insulation. In fact, it is a much better alternative than a metal roof because it is reliably protected in windy weather.
Whatever you choose, make sure your chickens are protected from the cold and rain.
Step 5: Add front door
Then add the front door. First mark with pencil and tape measure where you want to place the door of your henhouse. Then use a hand saw or an electric saw to cut through the front door. You can buy a door at any hardware store or use a used hand.
Another possibility is to make your own pieces of wood. Take four pieces of wood and saw them into rectangles to make a doorframe. You can also use the chicken wire to make the door grill. Add the hinges on one side and the latch and handle on the other side. Finally, screw the hinges into the chicken coop.
Step 6: Add floor
If you keep walking, you’re gonna need a place where you can walk chicken. Normally you can try to create a solid base with pieces of plywood. Also try to cover the ground with mulch. This will keep your chickens warm.
Another possibility is the use of linoleum, because it is so easy to clean.
Step 7: Protection
For the walls you can try to screw in a chicken wire to create a well ventilated chicken coop. However, if it is too cold, fill the hole with many boards from other pallets. You can try to cut several windows that can be closed for better ventilation.
If there’s a threat of predators on the other side, add a fence. It will not only protect your chickens from predators, but also your chickens inside.
You can try tying a tarpaulin to protect you from wind or rain.
Step 8: Adding a landscape
In this phase you can let your imagination run wild. This could include painting the chicken coop of pallets. You can also leave it in traditional red and brown or add a trendy colour.
Of course, it is also necessary to add certain functional elements, such as sockets, plugs, etc., to the system. In addition, you can build roses with wood waste. You can also just use old packaging with milk or fruit.
These steps will help you build a chicken coop from pallets without spending too much money. With the right tools you will be in the strongest poultry house at the best price. Finally, don’t forget how much fun it is to outsource and discover your creative potential. So, are you ready to give it a try?
4×8 pallet coop,a frame pallet chicken coop
Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.